Vincent Design Line 2

Vincent

Producten binnen Vincent Design Line 2:

  • Vincent Pre-Amplifier SA-93

    A new concept in a Vincent pre-amplifier.
    The consequent separation of current supply and low-level signal amplification is evident in the construction of this pre-amplifier. The audio channels are housed in a compartment separated from the power stage. The high standard of craftsmanship makes this pre-amplifier a true high-end component that now features altogether 7 inputs. This pre-amp can process balanced as well as unbalanced signals and it goes without saying that a remote control unit is also supplied.

    		  
    SA-93
     
    SA-93
     


    Colour

    blacksilver

    		 SA-93
     


    Technical Details

    Frequency range: 10 Hz - 20 kHz +/- 0.5 dB
    Nominal output voltage: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 250 mV
    Signal-to-Noise Ratio: > 93 dB
    Input Impedance: 47 kOhm
    Inputs: 5 RCA, 1 x XLR
    Outputs: 2 RCA, 1 XLR
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 70 x 380 mm
    Weight: 15 kg
    Colour: black/silver
      With -10 dB switch, ballanced
  • Pre-Amplifier SA-91Plus

    Already from a mechanical point of view the SA 91 is a true high-end component. The 3-in-1 case is separated in 2 compartments for the left respectively right channel whereby the 3rd compartment contains the dual power supply. All in- and outputs are available in either balanced or unbalanced circuitry. Unbalanced signals, from a CD player for example, are automatically transformed into a balanced signal. Two power amplifiers may be connected.
     

    SA-91 Plus
     
    SA-91 Plus


    Colour

    blacksilver

     

    		  


    Technical Details

    Frequency range: 10 Hz - 20 kHz +/- 0.5 dB
    Nominal output voltage: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 250 mV
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Inputs: 6 RCA, 1 x XLR
    Outputs: 2 RCA, 1 XLR
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 70 x 380 mm
    Weight: 10,5 kg
    Colour: black/silver
      Monoblock design, with each left and right channel and power supply housed in separate compartments, sharing one volume control, ballanced

     

  • Decoder Pre-Amplifier SAV-C2, multi-channel

     

     
    SAV-C2
     
    SAV-C2


    Colour

    blacksilver


    		 SAV-C2


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output voltage: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 250 mV
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Inputs: 7 x RCA, 1 x 6.1 RCA,
    3 x coaxial, 1 x Optical Digital,
    8 x RCA Video, 2 x S-Video, 2 x RGB
    Outputs: 1 x 6.1 RCA, 1 x Rec Out,
    1 x Video RCA, 1 x RCA SW2,
    1 x S-Video, 1 x RGB
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 98 x 360 mm
    Weight: 10 kg
    Colour: black/silver
      With bassmanagement and 2.1 function

     

  • Decoder Pre-Amplifier SAV-C1

     
    SAV-C1
     
    SAV-C1


    Colour

    blacksilver

    		 SAV-C1


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output voltage: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 250 mV
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Inputs: 6 x RCA, 6.1 RCA, 1 x XLR,
    3 x coaxial, 1 x Optical Digital,
    8 x RCA Video, 3 x S-Video
    Outputs: 1 x 6.1 RCA, 1 x 6.1 XLR,
    1 x Rec Out, 1 x Video RCA,
    1 x S-Video
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 106 x 390 mm
    Weight: 10 kg
    Colour: black/silver
  • HDCD Player CD-S3

    Drive unit CD7-II by Philips with digital server system. The digital-to-analogue converter component is a 24Bit/96kHz Burr-Brown PCM 1732 with HDCD-Decoder*. GIC low-pass filter and audio output stage with Class-A circuitry. High-grade toroidal core transformer. Outputs: digital-optical, digital D/A converter, RCA, XLR balanced. Finish: face plate black or silver.

    *HCDC is a Registered Trademark and patent by Pacific Microsonics Inc. USA.
    CD-S3
     
    CD-S3


    Colour

    blacksilver
     

    		CD-S3


    Technical Details

    System/CD-Formate/ Tuner Frequency Range: HDCD 24-Bit/96 kHz
    Output voltage: 2 V +/- 1,6 dB
    Frequency range: 10 Hz - 20 kHz +/- 0,5 dB
    Signal-to-Noise Ratio: > 95 dB
    Total harmonic distortion: < 0,003 %
    Channel sepperation: > 90 dB
    Dynamic: > 100 dB
    Mains supply: 230 V/50 Hz
    Outputs: 1 x XLR, 1 x RCA, 1 x coaxial, 1 x optical
    Dimensions (W x H x D): 430 x 135 x 330 mm
    Weight: 10 kg
    Colour: black/silver
  • SDV-3 CD/DVD-Player


     

    SDV-3
     
    SDV-3


    Colour

    blacksilver

      
    		SDV-3


    Technical Details

    CD-Formate: DVD/SVCD/DVCD/CVD
    (Digital Audio und Video Disc)
    VCD 1.0, 1.1, 2.0 Version
    (Mini Laser Audio und Video Laser Disc),
    CD-DA (Common Music Laser CD),
    HDCD, MP3 Audio CD
    Video Format: MPEG2 für DVD, MPEG1 für VCD
    Audio Formate: MPEG1, MPEG2, Dolby Digital, DTS
    Analog, Stereo, Virtual Surround, 5.1 Kanal
    Signal Output: Video System: NTSC oder PAL
    Video: 1.0 Vp-p (75 Ohm)
    S-Video: Y: 1.0 Vp-p (75 Ohm)
    C: 0.28 Vp-p (75 Ohm)
    Audio: 2.0 V +/-0.2 V
    Outputs: 6 x RCA 5.1 Canal, Video Output,
    S-Video, YUV, Scart, VGA, Optical,
    coaxial, 2 x XLR
    Frequency range: DVD 20 Hz - 20 kHz (+/- 1 dB)
    Signal-to-Noise Ratio: > 90 dB
    Mains supply: 100 - 260 V AC/50/60 Hz
    Dimensions (W x H x D): 430 x 98 x 345 mm
    Weight: 6,2 kg
    Colour: black/silver
      CD-Player with progessiv Scan. With separate CD-Board perfect for CD-Sound

     

  • 6 Channel Amplifier SAV-P200
    SSAV-P200

    SAV-P200



    Colour

    blacksilver
     


    Technical Details

    Frequency range: 10 Hz - 20 kHz +/- 0.5 dB
    Nominal output power RMS 4 Ohm: 6 x 250 Watt
    Nominal output power RMS 8 Ohm: 6 x 200 Watt
    Input sensitivity: 1,6 V
    Total harmonic distortion: < 0,1 % (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Inputs: 6 x RCA und XLR
    Outputs: 6 x 2 speaker terminals
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 280 x 520 mm
    Weight: 45 kg
    Colour: black/silver

     

  • 6 Channel Amplifier SAV-P150
    SAV-P150SAV-P150


    Colour

    blacksilver

    		  


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output power RMS 8 Ohm: 6 x 150 Watt
    Nominal output power RMS 4 Ohm: 6 x 200 Watt
    Input sensitivity: 1,6 V
    Total harmonic distortion: < 0,1 % (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Inputs: 6 RCA, 6 XLR
    Outputs: 6 x 2 speaker terminals
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 180 x 530 mm
    Weight: 34 kg
    Colour: black/silver
      Ballanced, display shows power-level of each channel

     

  • Mono Amplifier SP-991Plus

    The SP 991 is a power amplifier in monophonic design. This was necessary because of the already tremendous weight of 30 kg for each mono-block. The circuitry's layout is balanced. Each mono-block can be driven via either balanced XLR connectors or unbalanced RCA jacks.

    The heart of each block consists of a toroidal core transformer of 1,500 W, 120,000 µF energy storage capacity and 24 power transistors from TOSHIBA.
    Connections: 3 sources. bi-wiring or 2 speakers.
    Finish: face plate black or silver.

     
    SP-991
     
    SP-991


    Colour

    blacksilver

    		  


    Technical Details

    Frequency range: 10 Hz - 20 kHz +/- 0.5 dB
    Nominal output power Class-A 8 Ohm: 100 Watt
    Nominal output power RMS 8 Ohm: 300 Watt
    Nominal output power RMS 4 Ohm: 600 Watt
    Input sensitivity: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Inputs: 1 RCA, 1 XLR
    Outputs: 2 x 2 speaker terminals
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 180 x 530 mm
    Weight: 30 kg
    Colour: black/silver
      Mono Class Amplifier, ballanced, more than 120.000uF
  • Stereo Amplifier SP-993

    The goal here was to implement the high sonic standard of the SP 991 mono amps in one case. Hence 24 Sanken power transistors per channel deliver about 400 W into 4 Ohm, respectively 50 W into 8 Ohm in pure Class-A operation. Switching from Class-A to AB mode is automatically carried out by the amplifier if there is a need to do so.

    In order to further enhance the pure sound of this amplifier its energy supply has been divided to make the power stage work as a voltage source as well as a current source.

     
    SP-993
     
    SP-993


    Colour
     
    blacksilver
     

    		 


    Technical Details

    Frequency range: 10 Hz - 20 kHz +/- 0.5 dB
    Nominal output power Class-A 8 Ohm: 2 x 60 Watt
    Nominal output power RMS 8 Ohm: 2 x 200 Watt
    Nominal output power RMS 4 Ohm: 2 x 400 Watt
    Input sensitivity: 2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Inputs: 2 RCA, 2 XL
    Outputs: 4 x 2 speaker terminals
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 180 x 530 mm
    Weight: 30 kg
    Colour: black/silver
      Stereo Class Amplifier, ballanced, display shows power-level of each channel

     

  • Mono Amplifier SP-996

    The smallest in the family of power amplifiers by Vincent. Yet already its weight will tell you it's a genuine Vincent. Over 5 kg at the size of just about 88 x 234 x 220 mm give evidence of substantial performance and a power supply which is definitely able to provide this performance via the power stage transistors.

    This amp with its 125 W into 8 Ohm may be employed wherever there is only limited space available, or where multiple channels are needed without having to sacrifice good sound. The sound of this amplifier cannot be described. You'll have to hear it yourself.
    Available in silver (bi-colour) and black.

     
    SP-996 SP-996


    Colour

    blacksilver

    		  


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output power 8 Ohm: 125 Watt
    Nominal output power 4 Ohm RMS: 170 Watt
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 1.2 V
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 88 x 230 x 220 mm
    Weight: 5 kg
    Colour: black/silver
      with 12 V Triggerinput and switch-off-automatic
  • Mono Amplifier SP-997
    SP-997 SP-997


    Colour
     
    blacksilver

     


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output power 8 Ohm: 150 Watt
    Nominal output power 4 Ohm RMS: 250 Watt
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Input sensitivity: 1.2 V
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 160 x 268 x 225 mm
    Weight: 6,5 kg
    Colour: black/silver
      Symmetric, with 12 V Triggerinput and switch-off-automatic
  • Hybrid Tuner RDS STU-1

     
    ST-U1
    ST-U1


    Colour

    blacksilver
     

     

    		 STU-1


    Technical Details

    System/CD-Formate/ Tuner Frequency Range: FM: 87,0 MHz -108,0 MHz (in 50 kHz-Steps),
    AM: 522 kHz - 1611 kHz, (in 9 kHz-Steps)
    Used sensitivity (Tuner): FM: Mono 5 dBu, AM: 65 dBu/m
    Frequency range: 30 Hz - 15 kHz, +1 dB/-1,5 dB
    Signal-to-Noise Ratio: FM: Mono: 72 dB, Stereo: 70 dB
    AM: 50 dB with 80 % mod
    Total harmonic distortion: FM: 0,4 %/0,5 %, AM: 0,8 %
    Channel sepperation: 40 dB
    Mains supply: 230 V/50 Hz
    Outputs: 1 x RCA
    Dimensions (W x H x D): 430 x 95 x 340 mm
    Weight: 5,5 kg
    Colour: black/silver
      Tubes: 1 x 6N15; 1 x 6DJ8
  • Integrated Amplifier SV-233

    Integrated hi-fi amplifier. The electronic circuitry has been developed following the "fully-balanced" design philosophy. In particular the pre-amplifier section is of very high grade as it employs the devices OPA 2134 and OPA 2604 from Burr-Brown. 16 power transistors per channel are taking care of a stunning start-up. The power stage comes equipped with an oversized toroidal core transformer of 2 x 500 Watts plus an energy storage capacity of 40.000 µF per channel. Remote control unit supplied.
    SV-233
    SV-233


    Colour

    blacksilver

     

    		 SV-233


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output power RMS 4 Ohm: 2 x 280 Watt
    Nominal output power RMS 8 Ohm: 2 x 200 Watt
    Input sensitivity: 260 mV
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Inputs: 5 x RCA und 1 x XLR
    Outputs: 4 x 2 speaker terminals,
    1 x Rec Out, 1 x Pre Out
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 430 x 130 x 400 mm
    Weight: 17 kg
    Colour: black/silver

     

    • top quality audio experience:

    Linie 2 uniquely combines a clear and uncluttered design with excellent reproduction haracteristics.

    Immediately catching the eye in this high-grade series are the thin, roundedged, blasted-aluminium side strips which combine with the clear lines and sophisticated design of the middle section.

    The flagships of the range are the 6-channel SAV-P150 and SAV-P200 power amps which set standards in every regard.

    They only use top quality components and materials.