We pay particular care and attention to the quality, ergonomics and usability of our all our products. Nowhere is this more evident than in our Control Centers.
Our AV Control Centers are exceptionally easy to use, even in a darkened home theater. Their feel and familiarity immediately invite you to explore your McIntosh System, significantly enhancing your ownership experience.
MX136 Audio Video Control Center
# 2-Zone Controller
# DTS ES Discrete & NEO:6
# Dolby Digital EX & ProLogic IIx
# Component and HDMI Video
# 12 Analog Inputs
# MM Phono Stage
The newest video switching architecture is provided with four assignable high definition HDMI digital inputs and 5 component video inputs. Each of the 11 inputs has both audio and video signal paths.
Multiple modes of video are supported including digital video conversion of legacy video sources. Analog video sources with composite or ‘S’ outputs may be converted to component video to match modern display technology. Pure HD HDMI sources are switched and supported at the highest 1080p line rate.
Add the TM-1 AM/FM tuner module and enjoy the best AM and FM has to offer.
MX135 A/V Control Center
Read an article on the MX135 in the
April/May 2006 Issue of HDTV etc.!
# Balanced Inputs and Outputs
# Moving Magnet Phono Input
# Separate Listen and Record Input Selection
# Digitally Controlled Volume and Tone Controls
The MX135 has the performance you expect from McIntosh with a new level of flexibility, unmatched in the industry with five sets of component video inputs, along with composite and S-Video upconversion combine for unparalleled video connectivity.
The latest in Digital Audio Processing is built in with ProLogic IIx, Dolby Digital EX, DTS-ES, NEO:6 and Stereo 96. The MX135 is also the first to incorporate the state of the art Texas Instruments "Aureus" digital processing chip, which offers the fastest and most advanced DSP in the industry. The "Aureus" DSP is capable of 1200 million floating point operations per second assuring higher performance specifications and sound quality.
The MX135 includes a full-featured two-channel preamp with pure analog function including a phono preamp section. This embedded two channel preamp improves upon the performance of the most popular McIntosh two channel preamps in both distortion and signal-to-noise ratio.
An additional input is provided for the optional dealer-installed TM-1 Phase-Locked Loop AM/FM Tuner Module. A new event based learning remote control is included.
MX120 Audio Video Control Center
# 2-Zone Controller
# DTS, ES Discrete & NEO:6
# Dolby Digital EX & ProLogic IIx
# Component and HDMI Video
# 3 Balanced Audio Outputs
The newest video switching architecture is provided with 4 assignable high definition HDMI digital inputs and 3 component video inputs. 6 inputs have both audio and video signal paths.
Multiple surround and music modes utilizing the latest 24-bit converters provide thrilling surround effects and breathe new life into stereo recordings.
Audiophiles need not give up sound quality for flexibility with the MX120. Pure analog and 2-channel bypass modes are provided, as is low noise MM phono preamp.
MX119
# 8 Analog Inputs
# 6 S-Video Inputs
# 6 Composite Video Inputs
# 6 Digital Inputs
# All the latest Processing including Dolby ProLogic IIx, Dolby Digital EX, DTS-ES and Neo:6
Quick Facts
The MX119 is feature and value packed with 8 inputs all with analog audio and 6 with video. Any Composite or S-Video input can be up-converted to a component video signal via an internal video converter. 3 sets of component video inputs are provided and assignable to any input. All video inputs can be transcoded to component output.
Any Composite and/or S-Video Input can be up-converted to a Component Video Signal with the built-in Digital Video Processing Circuitry. There is also video switching for all three types of video signals.
The MX119 has the built-in ability to control a separate remote audio/video zone with program selection independent of Zone A, using a dedicated power amplifier and speakers. Interface the MX119 with the CR16 Remote Control System for 4 additional remote Audio/Video zones.
MHT200 Integrated Home Theater Amplifier
# Complete DTS/Dolby Digital/Dolby ProLogic 2 A/V package
# 8 x 140 Watt Built-In Power Amplifier
# 7.1 Processing for expansion modes
# 24 bit A to D and D to A converters (96kHz)
# 8 channel input
# Automatic calibration for speaker levels
# Component, Composite and S Video Switching
# Optional, dealer installed, AM/FM Tuner Module (TM-1)
# RS232 port for control with Crestron, AMX and Vantage Control Systems
The McIntosh MHT200 A/V Receiver has virtually all the features of the highly acclaimed MX134 preamp/tuner plus six 140-watt (into 4 ohms) amplifiers with McIntosh's exclusive Power Guard circuitry for the ultimate in Dolby Digital and DTS excitement (both with matrix rear channel center-channel capability). Second zone architecture with two additional on-board 140-watt channels makes multiroom expansion as easy as installing speaker wires.
This MHT200 is a complete DTS/Dolby Digital/Dolby ProLogic 2 A/V package. With eight, 140 Watt Built-In power amplifiers, Infrared remote control, 24 bit DSP processing for Dolby Digital, DTS and Pro Logic, 7.1 Processing for expansion modes, 24 bit A to D and D to A converters (96kHz), 7 audio/video source selections with re-assignable naming, 6 assignable digital audio inputs (3 coaxial, 3 optical), and an 8 channel input for use with virtually any future external processors this is one product that you should be able to enjoy for many years!
The MHT 200 also has numerous convenience features that allow you to forget about all the technology and enjoy the show! Features like Automatic calibration for speaker levels and delay (professional microphone included), Super tracking volume control for best imaging, 12 character alphanumeric fluorescent display to keep you informed, Automatic signal format switching between ProLogic II, Neo:6, Dolby Digital and DTS Processing, Exclusive McIntosh Power Assurance System, Component, Composite and S Video Switching and an Optional, dealer installed, AM/FM Tuner Module (TM-1) all add up to one complete entertainment solution.
An RS232 port is even included so you can control the MHT200 with a Crestron, AMX and Vantage Control System. Remote Operation of lights, screens and drapes can be done with the McIntosh HC1 Home Controller. Backlit glass front panels with illuminated nomenclature even make the MHT200 easy to use in your home theater.