Vincent Design Line 4

Vincent

Producten binnen Vincent Design Line 4:

  • Hybrid Stereo Power Amplifier SP-331MK
    SP-331
     
    SP-331


    Colour

    blacksilver
     

    		 


    Technical Details

    Frequency range: 10 Hz – 20 kHz, +/- 0.5 dB
    Nominal output power Class-A 8 Ohm: 2 x 10 Watt
    Nominal output power 8 Ohm: 2 x 150 Watt
    Nominal output power 4 Ohm: 2 x 300 Watt
    Input sensitivity: 1.5 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 2 x RCA
    Outputs: 4 x 2 speaker terminals
    Dimensions (W x H x D): 430 x 195 x 400 mm
    Weight: 21,5 kg
    Colour: black/silver
      Tubes: 2 x 6N16, 1 x 12AU7
  • Stereo Power Amplifier SP-331

    The power amplifier SP 331 is receiving the input signal via two 6N16 tubes per channel whilst power is provided by 12 transistors from TOSHIBA in each channel. The SP 331 can easily handle a load into 2 Ohm because of the mighty toroidal core transformer of 1,000 Watts and the energy storage capacity of 80,000 µF per channel..

    Connections: 5 sources. bi-wiring or 2-4 speakers.
    Finish: face plate black or silver. Pre- and power amplifier are also available separately.

     
    SP-331
     
    SP-331


    Colour

    blacksilver

     

    		  


    Technical Details

    Frequency range: 10 Hz – 20 kHz, +/- 0.5 dB
    Nominal output power 8 Ohm: 2 x 150 Watt
    Nominal output power 4 Ohm: 2 x 300 Watt
    Input sensitivity: 1.2 V
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 2 x RCA
    Outputs: 4 x 2 speaker terminals
    Dimensions (W x H x D): 430 x 160 x 450 mm
    Weight: 19 kg
    Colour: black/silver
  • Hybrid Stereo Pre-Amplifier SA-31MK
    SA-31
     
    SA-31


    Colour

    blacksilver
     

     

     

    		 SA-31MK


    Technical Details

    Frequency range: 20 Hz – 20 kHz, +/- 0.5 dB
    Output voltage: 2 V
    Input sensitivity: 350 mV
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 95 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 6 x RCA
    Outputs: 2 x RCA, 1 x Rec Out
    Dimensions (W x H x D): 430 x 95 x 365 mm
    Weight: 8 kg
    Colour: black/silver
      Tubes: 4 x 6N16
  • Stereo Pre-Amplifier SA-31

    A combination of tube sound and high transistor power. The pre-amplifier SA 31 is equipped with highly precise potentiometers from ALPS.

    Separated amplifier sections for left and right channel in order to achieve the best possible signal-to-noise ratio.
    The output stage works in Class-A mode of operation.

    Optimised in- and outputs. Prepared for the operation of two power amplifiers (2 x mono blocks).
     

    SA-31
     
    SA-31


    Colour

    blacksilver

     

    		  


    Technical Details

    Frequency response: 20 Hz – 20 kHz, +/- 0.5 dB
    Output voltage: 2 V
    Input sensitivity: 150 mV
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 6 x RCA
    Outputs: 2 x RCA, 1 x Rec Out
    Dimensions (W x H x D): 430 x 80 x 300 mm
    Weight: 4.5 kg
    Colour: black/silver
       

     

  • Hybrid Integrated Amplifier SV-226MK

    SV226 integrated amplifier - composed of 12AX tubes and power transistors by TOSHIBA. Expensive MPK-capacitors and extremely precise metal film resistors in the signal path. The powerful sound of the SV226 also conveys the sonic warmth of tubes.

    Connections: 5 sources, bi-wiring or 2-4 speakers.
    SV-226 MK II
     
    SV-226 MK II
     
    SV-226 MK II


    Colour

    blacksilver
      

    		SV-226MK II SV-226MK II


    Technical Details

    Frequency range: 5 Hz - 50 kHz +/- 1 dB
    Nominal output power 8 Ohm: 2 x 100 Watt
    Nominal output power 4 Ohm: 2 x 200 Watt
    Input sensitivity: 180 mV
    Total harmonic distortion: < 0,1 % (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 6 x RCA
    Outputs: 1 x Rec Out, 1 x Pre Out
    4 x 2 speaker terminals,
    1 x Jack Phone 6,3 Phone
    Dimensions (W x H x D): 430 x 130 x 400 mm
    Weight: 12,5 kg
    Colour: black/silver
     

    • Tubes for Pre Amp: 4 x 12AX7
    • Power Control : 2x 12 Volt Trigger out (3,5mm)
    • A- B Loudspeaker Switch

  • Integrated Amplifier SV-129

     
    SV-129
    SV-129


    Colour

    blacksilver
     

    		 


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0.5 dB
    Nominal output power 8 Ohm: 2 x 50 Watt
    Nominal output power 4 Ohm: 2 x 80 Watt
    Input sensitivity: 250 mV
    Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 5 x RCA
    Outputs: 2 x RCA, 1 x Rec Out, 1 x Pre Out,
    2 x 2 speaker terminals
    Dimensions (W x H x D): 430 x 100 x 330 mm
    Weight: 5 kg
    Colour: black/silver

     

  • Integrated Amplifier SV-121

     
    SV-121
     
    SV-121


    Colour

    blacksilver

     

    		 SV-121


    Technical Details

    Frequency range: 20 Hz - 20 kHz +/- 0,5 dB
    Nominal output power 8 Ohm: 2 x 50 Watt
    Nominal output power 4 Ohm: 2 x 80 Watt
    Input sensitivity: 150 mV
    Total harmonic distortion: < 0,1 % (1 kHz, 1 Watt)
    Signal-to-Noise Ratio: > 90 dB
    Input Impedance: 47 kOhm
    Mains supply: 230 V/50 Hz
    Inputs: 5 x RCA, 1x XLR
    Outputs: 1 x Rec Out, 1 x Pre Out
    2 x 2 speaker terminals
    Dimensions (W x H x D): 430 x 95 x 380 mm
    Weight: 10 kg
    Colour: black/silver
  • CD-S1.1 Hybrid HDCD-Player

    The CD-S1.1 is the consequent sonic further development of the CD-S1. Made with hybrid technology it uses a 6N16 tube for signal processing which greatly contributes to the unmistakable sound if this CD player. The digital-to-analogue converter is a 24Bit/96kHz chip from Burr-Brown. A special Audio-Analogue circuitry (GIC Low Pass Filter) is taking care of the pure and brilliant tonal transition. Power supply with oversized toroidal core transformer, headphone jack.

    Outputs: digital for D/A decoder, RCA and XLR balanced.
    CD-S1.1
     
    CD-S1.1


    Colour

    blacksilver

     

     

    		  


    Technical Details

    Frequency range: HDCD 24-bit/96 kHz
    Output voltage: 2 V +/- 1.6 dB
    Frequency range: 10 Hz – 20 kHz +/- 0.5 dB
    Dynamic: > 100 dB
    Signal-to-Noise Ratio: > 95 dB
    Total harmonic distortion: < 0.003 %
    Channel sepperation: > 90 dB
    Mains supply: 230 V/50 Hz
    Outputs: 2 x RCA, 1 x XLR, 1 x coaxial, 1 x Jack Phone 6,3 Phone
    Dimensions (W x H x D): 430 x 106 x 328 mm
    Weight: 8,5 kg
    Colour: black/silver
      Tube: 1 x 6N16
  • RDS Tuner STU-3
     
    ST-U3
     
    ST-U3
     
     


    Colour

    blacksilver

    		  


    Technical Details

    Frequency range: FM: 87,0 MHz - 108,0 MHz (in 50 kHz-Steps),
    AM: 522 kHz - 1611 kHz (in 9 kHz-Steps)
    Frequency range: 30 Hz - 15 kHz, +1 dB/-1,5 dB
    Dynamic Sensitivity: FM: Mono 5 dBu, AM: 65 dBu/m
    Signal-to-Noise Ratio: FM: Mono: 72 dB, Stereo: 70 dB
    AM: 50 dB with 80 % mod
    Total harmonic distortion: FM: 0,4 %/0,5 %, AM: 0,8 %
    Channel sepperation: > 40 dB
    Mains supply: 230 V/50 Hz
    Outputs: 1 x RCA
    Dimensions (W x H x D): 430 x 72 x 330 mm
    Weight: 5,2 kg
    Colour: black/silver
  • SSW-3

    The SSW3 active subwoofer by Vincent impresses with tried and tested amplifier technology and much power. Its noble appearance and high-grade features make it therefore ready for an award.

     
    SSW-3
     
    SSW-3


    Colour

    blacksilver
     

    		 


    Technical Details

    Woofer Size: 2 x 12" (300 mm)
    Nominal output power: 145 Watt (4 Ohm)
    Cross over: 50 Hz - 150 Hz (-12 dB/oct)
    Frequency range: 30 Hz - 120 Hz (-10 dB)
    Phase: 0° or 180°
    Inputs: 1 x RCA
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 380 x 380 x 420 mm
    Weight: 29 kg
    Colour: black/silver
  • SSW-1

    It should be able to deliver lots of sound pressure and take care of the lowest frequencies. Both requirements could be well achieved in the SSW-1 and certainly in a manner that's very typical for Vincent who developed and is manufacturing it. The built-in amplifier has an abundance of power in the region of 150 W into 4 Ohm. The 12" woofer is easily transforming this power into a cinema atmosphere in your living room. In combination with Vincent's AV amplifiers this sub-woofer sure does enrich the perception of basses in music and home cinema. Its technical specifications speak for themselves.

     
    SSW-1
     
    SSW-1
    		 


    Colour

    black
     

    		 


    Technical Details

    Woofer Size: 12" (300 mm)
    Nominal output power: 150 W (4 Ohm) (THD 0.1% 100 Hz)
    Frequenzweiche: 50 Hz - 150 Hz (-12 dB/oct)
    Frequency range: 20 Hz - 250 Hz (-10 dB)
    Phase: 0° or 180°
    Inputs: 1 x RCA
    Mains supply: 230 V/50 Hz
    Dimensions (W x H x D): 460 x 485 x 400 mm
    Weight: 25 kg
    Colour: black
  • Phono-Preamplifier MM/MC PHO-111

    The increasing demand for high-quality analogue record players made Vincent develop its own phono pre-amplifier. The PHO 111 can be universally employed between any record player and amplifier. It accepts moving coil (MC) as well as moving magnet (MM) pick-up cartridges. The external power supply eliminates induced hum and noise.
    PHO-111
     
    PHO-111


    Colour

    blacksilver
     

    		 


    Technical Details

    Frequency range: 20 Hz – 20 kHz +/- 0.5 dB
    Output voltage: 200 mV/1 kHz
    Total harmonic distortion: < 0.0005 % max.
    Input sensitivity MM I & II: 4 mV/1 kHz
    MC: 0.45 mV/1 kHz
    Signal-to-Noise Ratio MM I & II: > 88 dB
    MC: > 78 dB
    Input Impedance MM I: 47 kOhm/100 pF
    Input Impedance MM II: 47 kOhm/300 pF
    Input Impedance MC: 100 Ohm/100 pF
    Mains supply: über Steckernetzteil 16 VAC/200 mA
    Inputs: 1 x RCA
    Outputs: 1 x RCA
    Dimensions (W x H x D): 145 x 55 x 125 mm
    Weight: 0,5 kg
    Colour: black/silver

     

    • Tradition combined with the latest technology.

    In Vincent’s concept of hybrid amplifiers there is no room for compromise.

    This range is distinguished by the consistently high quality of the sound and the materials. Of prime importance here is not elaborate design but functional application in which the power and the precision may not always be apparent at first glance.

    Listening to music with no regrets is what it’s all about.